Details
A color-matched, low VOC, environmentally sound, two-component concrete curing material for exterior concrete flatwork.
LITHOCHROME® Colorwax™ is a two-component system formulated for curing exterior concrete that has been colored with CHROMIX® Admixtures for Color-Conditioned® Concrete, LITHOCHROME® Color Hardener, or EMERCHROME® Floor Hardener. Color-matched to the concrete color, or used in A-11 Concrete Gray on uncolored concrete, LITHOCHROME Colorwax is an ideal curing material where a uniform appearance is desired and the concrete will be allowed to weather naturally. It allows the concrete to develop its full color potential and brings out the inherent beauty of the surface.
For curing, LITHOCHROME Colorwax is a premium-quality, environmentally sound curing membrane that complies with stringent air-quality regulations. Formulated to enhance color development, it retains moisture throughout the entire curing cycle to provide proper strength gain and to reduce shrinkage. Its superior curing properties are achieved with a thin film, reducing material cost. Concrete strength and abrasion resistance are increased while the surface is protected and staining is reduced. The concrete is easier to clean and maintain.
An additional thin coat of LITHOCHROME Colorwax may be applied over the initial cure coat to renew the appearance of exterior concrete at the completion of construction or to renew old applications of LITHOCHROME Colorwax after they have weathered or worn away.
Packaging
1-Gallon Pails & 5-Gallon Pails
Coverage
300 ft²/gal depending on concrete