Details

These stainless steel swage fittings meet mil. spec #MS21259. They have met all quality and testing requirements per MIL-DTL-781 and are approved for listing in QPL-781. The swage stud is left and right hand UNF thread and offered in a variety of sizes, ranging from 1/16" to 3/8".
MATERIAL: STAINLESS STEEL UNF Thread
ITEM | A (WIRE) | B (THREAD) | C | D | E (wrench flat) | WT(lb) |
RIGHT HAND, UNF |
MS21259-2RH | 1/16" | 0.14" | 1.05" | 2.47" | 0.16" | 0.01 |
MS21259-3RH | 3/32" | 0.19" | 1.20" | 2.88" | 0.19" | 0.02 |
MS21259-4RH | 1/8" | 0.25" | 1.38" | 3.33" | 0.25" | 0.04 |
MS21259-5RH | 5/32" | 0.25" | 1.38" | 3.63" | 0.25" | 0.05 |
MS21259-6RH | 3/16" | 0.31" | 1.45" | 4.00" | 0.31" | 0.08 |
MS21259-8RH | 1/4" | 0.38" | 1.75" | 4.94" | 0.44" | 0.17 |
MS21259-10RH | 5/16" | 0.50" | 2.00" | 5.84" | 0.63" | 0.38 |
MS21259-12RH | 3/8" | 0.56" | 2.25" | 6.66" | 0.69" | 0.5 |
LEFT HAND, UNF |
MS21259-2LH | 1/16" | 0.14" | 1.05" | 2.47" | 0.16" | 0.01 |
MS21259-3LH | 3/32" | 0.19" | 1.20" | 2.88" | 0.19" | 0.02 |
MS21259-4LH | 1/8" | 0.25" | 1.38" | 3.33" | 0.25" | 0.04 |
MS21259-5LH | 5/32" | 0.25" | 1.38" | 3.63" | 0.25" | 0.05 |
MS21259-6LH | 3/16" | 0.31" | 1.45" | 4.00" | 0.31" | 0.08 |
MS21259-8LH | 1/4" | 0.38" | 1.75" | 4.94" | 0.44" | 0.17 |
MS21259-10LH | 5/16" | 0.50" | 2.00" | 5.84" | 0.63" | 0.38 |
MS21259-12LH | 3/8" | 0.56" | 2.25" | 6.66" | 0.69" | 0.5 |
Additional Information
Manufacturer: Suncor Stainless, Inc.
For More Information on the Mil. Spec Swage Stud,
[Click Here] to Link to Manufacturer Web Site