Dayton Axe with 36" Curved Handle 35DR36C

35DR36C

Council Tool

The Dayton Pattern axe is the most-recognized axe pattern. So named for originating in the Dayton Ohio area, this is a great all around axe pattern available in various head weights and handle options.

Quick Overview

  • Forged steel head.Made in USA.
  • Hand sharpened, tapered bit for cutting and splitting.
  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
  • Head coated with red enamel and cutting edges in clear lacquer to deter rust.
  • 36" curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
  • Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content.
  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of the overall length of the handle is removed during assembly.

Interested in this item or want more information?

Hours:

Phone: 877-727-0767

Email:

Can't find what you want? Give us a call and we can help you find it.

Details


3.5 lb. Dayton pattern single bit axe with 36" curved wooden handle. Dayton pattern so named for the Dayton, Ohio area. A full-sized felling axe for general axe chores. Cutting edge is approximately 4.75" of overall length and the poll is square.

Additional Information


Manufacturer: Council Tool
For More Information on the Dayton Axe with 36" Curved Handle 35DR36C, [Click Here] to Link to Manufacturer Web Site

 
© Pensacola Hardware, Co. | All Rights Reserved