Details
Size Range::
3/8” Rod Sizes.
Material::
Cold Rolled Steel With A Plated Hardened Cup Point Set Screw And Lock Nut.
Finish::
Electro-Plated Zinc
Ordering::
Specify 103-101S Silverhawk
Approvals::
Ul Listed For Top Or Bottom Of Beam. Fm Approved For Nfpa 13, Maximum Rated Pipe Size. Complies With Manufacturers Standardization Society Sp-69 (Type 19 & 23), And Federal Specification Ww-H-171E.
Function::
Recommended For Attaching Hanger Rod To Top Or Bottom Flange Of A Beam Or Bar Joist, Where The Thickness Of A Joist Or Flange Does Not Exceed 3/4 Inch. The Open Back Design Permits Rod Adjustment And Visual
Verification During Installation.
Installation::
Must Install In An Upright Position.
Made In U.S.A. Patent Pending.
| Specifications |
| A | 3/8 inches |
| B | 1 3/16 inches |
| C | 1 5/8 inches |
| D | 17/32 inches |
| E | 3/4 inches |
| F | 3/8 (min.) inches |
| G | 15/16 inches |
| Max. Recommended Load | 400 lbs |
SilverHawk Top Beam Clamps are our strongest, lightweight top beam clamps. Made from cold rolled steel with a zinc plated finish, they are rust and corrosion resistant. These super strong SilverHawk clamps exceed UL and FM testing requirements. Zinc finish aesthetically works with plated rods and plated swivel ring hangers.
Tested by industry professionals, SilverHawk installation is quick and easy. Their unique counter balance design makes it easy to “spin” them onto threaded rods so installation goes faster. The open back shape provides visual verification during installation.