Details
US Patent Design 562,661 :
This 3-in-1 blow gun can be used as either a blowgun or to inflate car tires and truck tires where an angled dual-headed air chuck is required.
- Inflates Car Tires
- Inflates Truck Tires
- Use As A Blow Gun (With Safety Tip)
Specifications :
| Maximum Working Pressure : | 110 PSI (7.5 KGS) |
| Air Consumption at 90 PSI : | 1/4 in. Hose – 13 CFM
3/8 in. Hose – 15 CFM |
| Air Inlet Thread : | SAE Size: 1/4 in. FNPT Brass |
WARNING: This product is designed for compressed air systems only. Do not use this blow gun on air lines that are not regulated. Only for use on air lines with a maximum 110 psi. This gun has a safety tip with side relief holes to prevent tip pressure exceeding 30 psi when dead-ended, conforming to OSHA regulations. Do not modify or alter the gun or the gun tip. Use correct size male-threaded adapter (1/4 in. NPT). Make sure gun is securely tightened to the adapter. Do not re-tap or modify the threads for a nonstandard adapter. Please note that personal protective equipment and/or chip guards may be required for your specific application. Use of products contrary to directions, specifications, or these limitations may result in personal injury and/or property damage.