Drop-In Anchor Setting Tool

Simpson Strong-Tie

SKU / Product InfoQuantity
DIAST25
For Use With: DIA25, DIAL25
DIAST37
For Use With: DIA37, DIAL37
DIAST50
For Use With: DIA50, DIA50C, DIAL50
DIAST62
For Use With: DIA62
DIAST75
For Use With: DIA75, DIA75C

Quick Overview


    1. Setting Tools sold separately except for DIA37S and DIA50S.
    2. Setting Tools for use with carbon and stainless steel Drop-In anchors.
Interested in this item or want more information?

Hours:

Phone: 877-727-0767

Email:

Can't find what you want? Give us a call and we can help you find it.

Details


Drop-In Anchor Installation

  • Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the Drop-In Anchor Setting Tool Product Data table.
  • Drill the hole to the specified embedment depth plus 1/8" for flush mounting.
  • Blow the hole clean using compressed air. Overhead installations need not be blown clean.

    • Caution: Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity

  • Insert designated anchor into hole. Tap with hammer until flush against surface.
  • Using the designated Drop-in setting tool, drive expander plug toward the bottom of the anchor until shoulder of setting tool makes contact with the top of the anchor.

    • Additional Information

    Manufacturer: Simpson Strong-Tie
    For More Information on the Drop-In Anchor Setting Tool, [Click Here] to Link to Manufacturer Web Site
     
    Powered by 48ws.com
    © Pensacola Hardware, Co. | All Rights Reserved